OPTIMATE BATTERY CHARGER RANGE


Color: OPTIMATE 3
Price:
Sale price$499.90

Tax included

Description / Options & Sizing / Product Care and Instructions

OPTIMATE 2

The Optimate 2 smart charger-maintainer is the most cost effective solution for long term maintenance of a 12V battery. - the unique affordable battery maintainer. Easy to use with a simple LED display at a low price.

0.8 Amp charge rate

Connection: SAE

The OptiMate2 smart charger-maintainer is the most cost effective solution for long term maintenance of 12V batteries in any vehicle/craft that is stored indoors or outdoors.

OptiMate2 is also ideal for standby power applications - the interactive standby mode during long-term maintenance reverts to full charge mode if it sense high current drain from the battery.

OPTIMATE 3

4-channel OptiMate 3 - the unique affordable 6-step battery optimiser. Easy to use with the original OptiMate functions and intuitive LED display.

4 x 0.8 Amp charge rate

Connection: SAE

Since its launch in 1995, OptiMate has received wide acclaim as an outstanding compact automatic charger, maintainer and recoverer for 12V starter batteries of motorcycles, ride-on mowers and similar seasonal vehicles, as well as for sealed lead-acid gel and deep-cycle batteries used in back-up power support applications. The OptiMate 3 x 4 uses the proven OptiMate interactive charging programme in an affordable 4-channel package to charge and maintain up to four 12V lead-acid batteries completely independently.

OptiMate 3 is totally automatic and fully protected against user errors. There are no switches. Short-circuiting the charger output resets the programme, without sparks or blown fuses. Affordable, compact, intelligent and forgiving of errors, OptiMate 3 is the perfect tool for regular or long-term maintenance of batteries not in daily use.

How it works

  1. Battery check:  OptiMate 3 must be connected to a battery (retaining a minimum of 2V) to activate its output.
  2. Desulphation and recovery stage: Tests the battery for possible deep discharge or sulphation. If necessary, OptiMate 3 automatically engages a special high voltage recovery mode (up to 20V) with a very low fixed current to desulphate the battery.
  3. Bulk charge stage: Charges at 0.8 Amps constant current until such time as the battery is normally able to crank the engine.
  4. Verification stage:  A 30 minute charge & check cycle ensures that even well-used batteries are brought to full charge saturation. If necessary the programme reverts automatically to the bulk charging stage, repeating steps 3 & 4 as many times as may be necessary until the battery is thoroughly charged.
  5. Voltage retention test:  During a 30 minute pause the charging circuit monitors the battery's voltage to identify batteries unable to retain an adequate charge without charger support. The green LED indicates that the battery has passed the charge retention test and the red LED indicating that the battery voltage failed to remain above 12V. (A fully charged, undamaged lead-acid battery should normally retain a voltage of at least 12.5V.)
  6. Maintenance / float charge stage:  Irrespective of the voltage retention test result, a maximum voltage of 13.6V is applied with up to 200mA available to support connected electronic alarms or other small loads.

The voltage retention check (step 5) is repeated every 30 minutes and alternates thereafter with step 6 for as long as OptiMate 3 remains connected to the battery.

Recommended for: AGM / MF, STD, GEL and spiral cell batteries from 3Ah to 50Ah

Programme control: Microprocessor, 7 stages, fully automatic

Input Voltage: 100-240V  50-60 Hz

Input current max: 100-240V  50-60 Hz

Reverse drain current: less than 1mA per channel

Output current (bulk charge): 4 x 0.8A

Automatic desulphation: yes

Charge time limit: Safe to leave connected for months

Maintain/test cycles: 30 min/30 min (alternating hourly)

Delivered with eight interchangeable connection sets, four with clamps for bench charging, and four with in-line protection fuse and eyelet terminals for permanent attachment to in-vehicle battery to allow easy reconnection of charger when necessary

OPTIMATE 4

OptiMate4 Dual program is the latest version of the multiple award-winning OptiMate 4 - the unique multistage battery optimiser specially designed for modern 12V starter batteries from 2.5 to 50 Am-hours.

With OptiMate 4 Dual Program you can now either charge the battery direct, or select the program to charge via the 12V port on CAN-bus equipped BMW motorcycles (using either the optional O2 or O9 accessory plug lead).

OptiMate 4 Dual Program has all the proven Optimate 4 features plus:

Fully automate KEYLESS connection to CAN-bus equipped BMW's via the 12V accessory socket

Low voltage PULSE recovery for even more effective recovery of badly neglected, sulphated batteries

A user-friendly initial battery condition test on connection to give an instant indication of battery condition prior to charging

An extended 3-year warranty

OPTIMATE 4 S

The TM 290 is the ultimate LiFePO4 professional level battery charger. High efficiency diagnostic charger and tester for LiFePO4/LFP batteries. Perfect for charging and seasonal maintenance of a 12.8V-13.2V LiFePO4/LFP battery sizes from 2 to 100 Amp-hour.

Special features:

  • Battery SAVE mode with BMS reset: starts from 0.5V with continuous monitoring/testing of charge acceptance or bad/shorted cell condition. Unecessary (and unsafe) charging of a bad battery is prevented
  • safeT°: Automatic charge rate adjustment to ambient temperature sensed at the charger. Reduced charging below freezing, no charging if temperature is below -20°C/-4°F (can damage lithium batteries)
  • Ampmatic: Microprocessor adjusts current to ideal LiFePO4 charge curve to match battery size/condition, for fastest and most complete charge
  • Charging Amps: 5A (AmpMatic)
  • Use: Indoor/Outdoor (lowest temperature: -20°C/-4°F)
  • SAVE: Low Volt Start of 0.5V + 3-step low volt SAVE and TEST
  • Ideal for: LiFePO4 (LFP) 4 series batteries from 2-100Ah
  • Input: Global (100-240V 50-60Hz), high efficiency (CEC listed), fully sealed
  • Style: Weatherproof case with wall mounts, with 6ft/180cm AC supply lead and 6ft/180cm charge lead ending in SAE connector. Weatherproof battery lead and standard battery clip set included

Contact Us

Payment & Security

American Express Apple Pay Google Pay Mastercard PayPal Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed